보유기관명 |
춘천바이오산업진흥원 |
보유기관코드 |
|
활용범위 |
|
활용상태 |
|
표준코드 |
B104 |
표준분류명 |
|
시설장비 설명 |
1.Pressure Range:to 20000psi(1380bar) or more 2.Flow Rate Range:0.6 gpm at 20000psi based on water. or more 3.Electric Motor:15 HP 380V 3Phase 60hz TEFC 4.Dimensions:71L×31W×57"H (180×79×145cm) or more 5.Weight:1400lbs. (636kg) without oil or more 6.The slot size of mixing module is 100㎛ or less. 7.Air requirement:35~150 psi1scfm @ 50 psi pressure dew point of 0~35℉ 8.Hydraulic cooling water required:4 gpm @ 65℉ max.or more 9.Product Cooling water required:5 gmp @ 65℉ or more 10.The mixing module must be dimensionally fixed with no moving parts not dynamic valv to gain the uniform results. 11.The mixing module materials:diamond construction or more 12.The mixing module must be multi slotted designed to guarantee the scale up. 13.The high pressure pump must be used intensifier pump with simple linear motion by hydraulic system. 14.The high pressure pump must operate with long slow strokes minimizing piston speed and frequency providing longer seal life. 15.Cross contamination between process fluid and hydraulic fluid must be prevented by complete isolation of the two fluids and by ability to continually clean the isolation barrel. 16.This machine will use metal to metal seal with coned and threaded tubing and fittings. 17.Materials of construction for wetted parts include: 316 stainless steel alumina UHMWPE Teflon(PTFE)PEEK17-4 PH stainless steelNitronic 6015-5PH stainless steel. 18.Standard gasket is Teflon & O-ring material is Viton. 19. Mechanical Gauges for Product feed pressure product process pressure and hydraulic drive pressure 나노크기의 입자를 만드는 시스템 |
장비이미지코드 |
http://nfec.ntis.go.kr/storage/images/equip/photo/itep200710/.thumb/1154706462_1.jpg |
장비위치주소 |
강원 춘천시 후평1동 198-53번지 춘천바이오산업진흥원 바이오타운 바이오1동 1층 발효부속실 |
NFEC 등록번호 |
NFEC-2007-10-000497 |
예약방법 |
|
카타로그 URL |
|
메뉴얼 URL |
|
원문 URL |
http://www.zeus.go.kr/equip/read?equipId=Z-NTIS-0000105 |
첨부파일 |
|