| 저자(한글) |
김용환,서상용,김성태,나우정,민영봉,경상대학 농업기계학과,전남대학교 농과대학 농공학과,경상대학 농업기계학과,경상대학 농업기계학과 a 강화석,경상대학 농업기계학과 |
| 초록 |
This study was carried out to investigated the actual state of rice milling at local milling plants and to find out sources for elevating their milling recoveries in both quantity and quality. At 36 local milling plants located in Gyeongnam and Jeonnam , milling recoveries and head rice recoveries were measured with respect to their different milling systems and rice varieties. Then, the same samples of rice were milled by experimental milling equipments at laboratory, and the two experimental results were compared in order to determine the amount of milling recovery possibly to be increased. The results of this study are as follows ; 1. Milling recoveries of rice at local milling plants were proved to have no relationship with milling systems, and were 68.1% per ent and 72.6percent on an average with new variety and native variety, respectively. 2. The milling recoveries above stated can be elevated 4.5 percent and 2.9percent with new variety and native variety, respectively, by developing and extending technologies of manufacturing and handling rice milling machinery. 3. The head rice recovery of new variety at local milling plants has insignificant differences among milling systems, and was 54.8 percent on the average. With native variety, the recovery by friction type rice polisher was 0.9percent higher than that of friction-abrasive type polisher, and was 64.9 percent on the average. 4. The head rice recoveries of new variety and native can be elevated 5.1percent and 3.9percent, respectively, by the same stimulation above mentioned. |
